"

英超外围下注_五大联赛外围平台拥有全球最顶尖的原生APP,每天为您提供千场精彩体育赛事,英超外围下注_五大联赛外围平台更有真人、彩票、电子老虎机、真人电子竞技游戏等多种娱乐方式选择,英超外围下注_五大联赛外围平台让您尽享娱乐、赛事投注等,且无后顾之忧!

  • "
         
    Set as homepage   |   Add to bookmarks 
          Amada
          Fanuc
          Trumpf
          Bystronic
          NTC
          Mitsubishi
          TANAKA
          JFMI
          Precitec
          Primas
          consumables for fiber laser
          AMADA Second-Hand Machine
    贸易通在线洽谈
    阿里巴巴诚信通档案
    Your place:   Home  >> TECH >> The main laser cutting process
    The main laser cutting process
    润之数控原创      [2007-10-9]
    1, vaporization cutting.

         The high power density laser beam heating, surface temperature to the boiling point temperature the speed is so fast enough to avoid the heat conduction melting, vaporization was part of a steam disappeared, as some materials emitted from the kerf at the bottom of the auxiliary gas flow was blown off.

    2, melt cutting.
        When the incident laser beam power density above a certain value, the beam irradiation point Ma Kai material internal evaporation, forming holes. Once the holes formed, it will absorb all the bold as the incident light beam energy. Small holes were surrounded by molten metal wall, and then, with the support beam coaxial airflow around the hole melting material removed. With mobile workpiece, by cutting holes simultaneously teloping direction, forming a kerf. Laser beam to continue along this seam in the forefront of irradiation, or sustained pulsating melting material from within the joints were blown off.

    3, oxidation melting cutting. 

        Melting cutting general use inert gas, if replaced by the activity of oxygen or other gases, materials in the laser beam irradiation was ignited, and a fierce oxygen chemical reaction and produce another heat source, called oxidation melting cutting. 4, fracture controlled cutting. 

         For easy heating damage brittle materials, through a high-speed laser beam heating, controllable cut, called the control fracture cutting. This cutting process mainly include: laser beam heating small regional brittle materials, in the region arising from the large thermal gradient and severe mechanical deformation, resulting in formation of cracks. As long as a balanced heating gradient, can guide the laser beam cracks in the direction of any need to produce.
    About us  |   News  |   Tech  |   Employ  |   Feedback  |   Contact us 
    Copy © 2007 Dongguan Runzhi Numerical Control Equipment Co.,Ltd.        Supply by: www.10dg.com
    英超外围下注_五大联赛外围平台